AGNEW@RUBY.VCU.EDU (Brainwave Surfer) (07/08/90)
>From: "Jacques J. Goldberg" <PHR00JG%TECHNION.BITNET@CUNYVM.CUNY.EDU> >Subject: VT-10x emulator ? > Does anybody know of a DEC-VT100 or higher terminal simulation program, > preferably with sources ? ( target is CPM/3 Z80 Lobo, memory mapped comm > ports, display control very close to SOROC-IQ120, ADM-31 and ADM-3) Dear Jacques, I may not be real sure but Kermit works for me. However, I'm using a VT180 and that may be translating the ansi in firmware instead of via Kermit. Good Luck! /^^^\ \ / Jim Agnew AGNEW@VCURUBY.BITNET, / > || Neurosurgery, AGNEW@RUBY.VCU.EDU /\_/ ' \ / MCV-VCU This tape will self destruct in /________________> Richmond, Va five seconds. Good luck, Jim..."
trilo@clotho.acm.rpi.edu (Ross Presser) (07/13/90)
In article <6A2AE6D1C21F80103B@Gems.VCU.EDU> AGNEW@RUBY.VCU.EDU (Brainwave Surfer) writes: >>From: "Jacques J. Goldberg" <PHR00JG%TECHNION.BITNET@CUNYVM.CUNY.EDU> >>Subject: VT-10x emulator ? >> Does anybody know of a DEC-VT100 or higher terminal simulation program, >> preferably with sources ? ( target is CPM/3 Z80 Lobo, memory mapped comm >> ports, display control very close to SOROC-IQ120, ADM-31 and ADM-3) > >Dear Jacques, I may not be real sure but Kermit works for me. However, >I'm using a VT180 and that may be translating the ansi in firmware instead >of via Kermit. Good Luck! Qterm by the esteemed David Goodenough will emulate VT100 fairly well, if the real terminal it's talking to has (at least) screen clear, direct cursor addressing, line delete and line insert. Char insert and char delete help. Look for QTERM42G.LBR on Simtel20. You'll also need EXL.LBR or something else that can handle ?Y? files. However, source is not available.
ahm@rick.att.com (Andy Meyer) (07/16/90)
In article <#DT$%3$@rpi.edu> trilo@clotho.acm.rpi.edu (Ross Presser) writes: > QTERM by the esteemed David Goodenough will emulate VT100 fairly well, if > the real terminal it's talking to has (at least) screen clear, direct > cursor addressing, line delete and line insert. Char insert and char delete > help. Look for QTERM42G.LBR on Simtel20. You'll also need EXL.LBR or > something else that can handle ?Y? files. However, source is not available. For the ?Y? files I've used UNCRLZH.COM Before QTERM will run on a specific machine, however, it needs to be patched. Obtain a copy of QTPATCH.LBR, which contains patch source code for various machines, plus ZSM.COM and ZPATCH.COM; programs that make this a relatively painless procedure. I've become quite fond of QTERM because of it's scripting capability, and personally have versions running on Altos 580, Sony SMC-70, Televideo TS-816/40 and of course TS-803. Andy -- Andreas Meyer ahm@rick.att.com "It's deja-vu all over again..." ..att!rick!ahm