jungkunz@doitcr.doit.sub.org (Helmut Jungkunz) (09/17/90)
Hello people, I am the head of the Munich Schneider/Amstrad CPC User Group (SCUG) and I am also SIG-OP of NBBS 08165/60041 300 1200 2400 Baud which represents the direct contact to ZNODE #51, the only European ZNODE. You have to be a registered user with NBBS to access this system, though. Membership is paid on time-dependant credits. So- you decide, when your money is going down the line, not a stupid bank computer. Fees are v e r y moderate, believe me. Besides, we are looking for AMSTRAD users all over, to improve the performance of our equipment. Many utilities can be programmed in a portable manner, so they can both run on PCWs and CPCs without any changes. This is a very important point, which is often overlooked and creates lots of unnecessary work. Very good standard routines can be found in SYSLIB versions, latest of which is version 4. All Help-files and 30 MB of utilities for ZCPR can be accessed here. Note: Z3PLUS is testes and works fine on the AMSTRAD PCW as well! So now you can make use of all the fine goodies for CP/M Plus as well! 3" discs are no pronlem to get over here. They're not too expensive (about 3 to 4 US \$s each, depending on exchange rates, I suppose). User Groups, please do get in contact with us! We use all kinds of CP/M Machines Atari Sts and IBM compatibles. We don't want any contacts with illegal copiers of software, we want good and friendly contacts to all colleagues. Hope to hear from you soon! Ciao, -> Helmut Jungkunz <-