SABAHE@MACALSTR.EDU ("arun baheti ") (10/24/90)
Re: 820-I/II identification It does sound like you have a -II, not a -I. You should have several options. From the monitor when you turn on the system, does the machine give three choices (load, typewriter, terminal host?)? If so, it is a -II. To set baud rate, you can use a monitor command "B" in the following manner: B 7 A (Baud 7=1200 bps port=A). B A A will set for 2400; the hex listing sent previously gives other values. You may also be able to find some cheap 8" or 5.25" drives at a local Xerox Store or via a Xerox oriented BBS, and then run CP/M software. --arun baheti nbaheti.elsegundo@xerox.com sabahe@macalstr.edu