frank@twg.com (Frank McConnell) (03/07/91)
I picked up a few SA860 drives as spares a while back; these are half-height 8" drives, and as such don't have the nice hefty 110 VAC motors found in canonical full-height drives. Instead, these drives look much like what PC 5.25" half-heights aspire to be when they grow up, with a bigger version of the "flat" spindle motor and a quarter-turn handle to "close" the drive. I now would like to use these to replace a pair of SA850 full-height drives. The problem is, these drives have a single power connector that is different from either of the two on the 850s, and of course I have no service or installation manual for the 860s :-(. Does anyone out there have info on what the power connector expects? Or, perhaps, pointers on where I could get the documentation for the drives? (Or even tales of terror about the troubles I'm asking for!) Feel free to mail me; I'll summarize mailed responses. Thanks in advance! -Frank McConnell "I want my MPE" E-mail: <FRANK@TWG.COM> Tel: +1 415 969 3770