bill@aimt.UUCP (Bill Dana) (03/09/88)
Anybody know what the clock speed of the 68000 on the Tandy 6000? I would REALLY appreciate it if you could let me know if you do. I have not been able to find anybody with this info. That being an older machine... Thanks in advance. -- Bill Dana AIM Technology Palo Alto, CA (415)856-8649 {uunet,pyramid!weitek,{ames,sun}!coherent}!aimt!bill "It's 160 miles to Chicago; we have a full tank of gas, 1/2 pack of Cigarettes, it's dark and we're wearing sunglasses.... Hit it."
daveb@laidbak.UUCP (Dave Burton) (03/10/88)
In article <667@aimt.UUCP> bill@aimt.UUCP (Bill Dana) writes: >Anybody know what the clock speed of the 68000 on the >Tandy 6000? I would REALLY appreciate it if you could >let me know if you do. I have not been able to find >anybody with this info. That being an older machine... I'm not sure what it buys you, but it's 8MHz. The older Model 16 ran at 6MHz. In both of them the z80 runs at 4Mhz, and since it's the I/O controller, you hit a bottleneck here. I don't know the timings of the rest of the system (semi MMU, bus, memory access), but if you need more info, check with Tandy for the Technical Reference Manual for the 6000. I have a copy and will look up info you may wish to know if you drop me a line. -- --------------------"Well, it looked good when I wrote it"--------------------- Verbal: Dave Burton Net: ...!ihnp4!laidbak!daveb V-MAIL: (312) 505-9100 x325 USSnail: 1901 N. Naper Blvd. #include <disclaimer.h> Naperville, IL 60540