oolidjr@hubcap.UUCP (Joe Moll) (05/11/88)
Try clearing the extra memory with the basic 'CLEAR' command. The basic manual that came with your machine should contain the info. on the clear command. The statement CLEAR ,,,32768 will clear the 32k needed in the 320x200x16 and 640x200x4 color modes. Look in chapter 8 of the basic manual for any more info. on the graphics modes. In regards to the TV question. You need to put a RF Modulator between the Tandy and the TV. The video output is pure video for use by monitors. TV's need this info on a carrier signal. Happy Graphing .... -- /=----------+^ jlmoll@clemson.bitnet Joe Moll --------=\ Internet | oolidjr@hubcap.clemson.edu Clemson University \ UUCP | {pick a hub}!hubcap!oolidjr Clemson, SC \ |\=--------+--------/`