peckar@wfooff.dec.com (Mike DTN: 242-2853) (06/11/88)
Hi. I have a TRS model III which I have been using at home as VT terminal to talk to my system at work. I am currently using XTERM, which gives me VT-52 emulation, but is not satisfactory for my needs. The big problem is that the model III has a 64 col. screen, and since I use the terminal to do a lot of reading, the wrap-around of the last few characters of the 80 col. texts I read makes my eyes go gaga. A fellow deccie has told me that he wrote an emulator several years ago which emulates VT-132, and simulates 80 col.s on the 64 col. screen. He has since lost that program, but he told me he posted it here a few years ago. If you have this software, which was written by Mike Leibow, I would very much like a copy, and would reumbure any postage/disk costs most graciously. If you know of any other terminal emulation software which provides 80 column emulation on the 64 column model III, and VT-100 or better emulation, please send me a reply at: (Internet) peckar@wfooff.DEC.COM Note: I am not a subscriber to this newsgroup, so I will not see any replies posted to comp.sys.tandy. If you have problems sending me mail, drop me a card at my home address or give me a buzz. Thanks in advance. Mike. -- Mike Peckar, 189 Center St., Chicopee, Ma 01013 Home: 413-594-8378 Office: 413-572-2853