[comp.sys.tandy] Xenix System For Sale. Other goodies as well.

rmb384@leah.Albany.Edu (Robert M. Bownes III) (07/09/88)

	I have decided to trade up to a newer system and consequently must 
get rid of the old one. However, I have to sell ALL of the old one before I can
get the new one. Consequently, if I can't get offers for all of the items
*'d below, none of them go. However, if you are interested in ALL of the *'d
items, the price might come down some. I'll be willing to pick up the postage
on everything but the Power Supply (Unless you buy that with something else...)

	Here it All Is:

	*1)	Tandy Model II Upgraded with 6000 8Mhz 68000 CPU
		Includes Z80, 68000 Cpu's, 1 8" SSDD Shugart Disk,
		1 Mb 68K RAM, Xenix 3.2 core OS, 250+ disks of sources
		from the net and elsewhere, Lot's more. Call me if 
		you want the full list. (~6 linear ft of manuals.....)

		$1000.00 Firm.

	*2)	Tandy Hard Disk Interface and Controller for II/12/6000.
		Seagate ST225 20Mb Hard Drive.
		This is the 2 board controller set, one in the computer,
		one at the drives. Controls up to 4 hard drives.
		
		$450.00 Firm

	*3)	Multi-Term board. Adds 3 serial ports to the II/12/6000
		
		$110.00 Firm

	*4)	2 Drive Thinline Expansion Bay. This is 2 8" DSDD half
		height drives as sold by Tandy/RS. I bought it new in 
		Dec 87.

			$300.00	Firm

	5)	144K Memory boards. originally used for ARCnet and Visicalc
		upgrades. Fully stuffed.

		$40 each  (2)

	6)	Power Supply for #2. 
		
		$35.00 plus shipping.

	7)	Model III Main Logic board.

		$30.00

	8) 	10" x 10" x 5" full of old junk IC pcb's. Usefull for those
		of you who are into removing all the ic's from a PCB and
		reusing them.

		$10.00	(I have at least 3 or 4 of these.)

	9) 	National Semiconductor IMP 8-C microprocessor.  Far ahead
		of it's time back when it was designed. A whopping 256 bytes
		of 1ms ram, 1K ROM. A peice of history. It might even
		run.
	
		$15.00 (I'll give it to anyone who can prove they worked
			on the project originally....)


-- 
Bob Bownes, Aka Keptin Comrade Dr Bobwrench III	|  If I didn't say it, It
bownesrm@beowulf.uucp  (518)-482-8798		|  must be true.
{steinmetz,brspyr1,sun!sunbow}!beowulf!bownesrm	|	- me, tonite -