[comp.sys.tandy] Needed: Docs for Model 4 hard drive controller.

scheer@igloo.UUCP (Jon Scheer) (11/18/88)

Hi.

   I'm not sure this got posted, so I'll do it again.  My apologies if
it already was.

   I'm looking for docs/specs/schematics/anything for a hard disk controller
board which works with a Model 4.  The board number (?) is:
	8709294   Rev A

   I was told that this board was mounted external to the 4 (the board is
roughly 8.5 x 11).  I wonder if it was originally mounted *in* a case with 
one of those old 5 meg hard drives (the ones that could sit under a Model I
monitor).  Also, it looks like the board can support up to 4 hard drives.

   This board supposedly has some problems, so technical info is rather
critical.

   If anyone has docs/etc or even knows a little about the board, I would
appreicate hearing from you.

   Oh yeah, please DO NOT reply to this message; use one of the addresses
listed below, or if they don't work, post to this group.

   Thank you.

Jon Scheer
   ...!mcdchg!amtfocus!outback!wombat
or
   F1JON@ISUMVS.BITNET