[comp.sys.tandy] DMP 130

garcia@dinghy.cis.ohio-state.edu (carlos e garcia) (05/08/89)

The first thing you must do is make sure the dip switches are set correctly.  
In switch panel 1, dip switches 1,2, and 3, should be up (or in the on
position).  The Tandy DMP 130 is a relatively old printer.  There is no set 
Epson printer that the Tandy emulates.  Your best bet is to choose an old 
Epson model when using programs that require you to use a printer driver 
that does not specify the Tandy DMP 130.  The DMP 130 will usually do well 
with these printer codes.