bobp@cbnewsl.ATT.COM (robert.phillips) (07/31/89)
Is there anyone out there familiar with the Tandy Plug 'n Power? This neat device plugs into the cassette port of a model I/III/IV and allows one to control appliances throughout the house. The hitch is that one needs receiver modules on the appliances. I acquired this with some hardware and software I bought a while ago. I know that home control systems are available, and I'm hoping that someone will be able to direct me to a set of receiver modules that are compatible with this thing. I realize that I should (from a time and effort standpoint) probably just buy a new control system if I REALLY want one, but the prospect of actually doing something useful with the Model I I have lying around is SO appealing.... Thanks in advance, Rob Phillips P.S. to Steve Henning, if you are out there The model IV is working out really well. I still haven't sorted through EVERYTHING, but I'm moving along. Thanks a million.
Mac.Druaidh@f69.n363.z1.FIDONET.ORG (Mac Druaidh) (08/07/89)
"> Is there anyone out there familiar with the Tandy Plug 'n "> Power? Very. I use a HomeMinder system here at the home. "> will be able to direct me to a set of receiver modules that "> are compatible No problem - stop by your Shack and pick up as many Plug'n'Power modules as your system will support. You can also use X-10 and Sears modules, and they're close to the same price. -- Fidonet: Mac Druaidh via 1:363/9 Internet: Mac.Druaidh@f69.n363.z1.FIDONET.ORG Usenet: ...!peora!rtmvax!libcmp!mamab!69!Mac.Druaidh