garyk@techsup.UUCP (12/20/89)
/* Written Dec 14, 1989 by ai-lab.UUCP!mbeck in techsup:comp.sys.tandy */ /* ---------- "Inherited DMP-400 printer, no manua" ---------- */ I've been given a DMP-400. I plug my PC's printer cable into it and things seem to work well.. except for the following: * The printer double spaces. Apparently seeing a CR causes the printer to CR and LF. * Does the DMP-400 understand the horizontal tab (^I) character? I seem to be getting an "X" with a short line over and under it. There are eight switches on the rear panel for which I have no information. Desired: Information on the rear panel switches. Is there a manual available for this printer? The local Radio Shack says they can't help me. What is the 5-pin DIN connector on the rear panel used for? Mark Becker mbeck@ai.mit.edu /* End of text from techsup:comp.sys.tandy */ Function Dip Switch (Left Rear Side of Printer) OFF=OPEN CR=Carriage Return LF=Line Feed 1 OPEN DMP-400 Emulation CLOSED LP6 Emulation 2 OPEN 1200 BPS Serial CLOSED 600 BPS Serial 3 OPEN Parallel Mode CLOSED Serial Mode 4 OPEN Data Processing Mode CLOSED Word Processing Mode 5 OPEN LF Gives LF Only CLOSED LF Gives LF + CR 6 OPEN CR Gives CR + LF CLOSED CR Gives CR Only 7 OPEN Prints Normal ASCII CLOSED Prints Modified ASCII 8 OPEN Prints European Symbols CLOSED Prints Japanese Kana Symbols Rotary Font Switch (10 Position) (Located Inside Cover Front Left Side) 0 Standard 10 CPI 1 Elite 12 CPI 2 Condensed 16.7 CPI 3 Proportional 4 Correspondence Quality 10 CPI 5 Correspondence Quality 10 CPI 6 Correspondence Quality 10 CPI 7 Correspondence Quality 10 CPI 8 Standard 10 CPI 9 Elite 12 CPI The 5 Pin DIN connector is for serial use. The manual is Part# MS-2601251 Catalog# 26-1251. The Phone# for Tandy National Parts is 817-870-5600. They accept credit cards. {sys1:texbell:trsvax}!techsup!garyk
root@qcdev.UUCP (12/22/89)
/* Written 1:24 pm Dec 19, 1989 by techsup.UUCP!garyk in qcdev:comp.sys.tandy */ The manual is Part# MS-2601251 Catalog# 26-1251. The Phone# for Tandy National Parts is 817-870-5600. They accept credit cards. {sys1:texbell:trsvax}!techsup!garyk /* End of text from qcdev:comp.sys.tandy */ Tandy National Parts now has a Toll-Free number for customers wanting to order manuals/parts/etc. Tandy National Parts 900 E. Northside Dr. Ft. Worth, TX 76102 (817) 870-5600 TOLL-FREE: 1-800-442-2425 Keith Ward {sys1,techsup}!npqc!kward