WTW101@PSUVM.BITNET (Bill Warner) (01/06/90)
Hello - I need some help about Tandy joysticks. I need to connect one to an IBM type joystick connector. I need to know how the various signals from/to the Tandy joystick correspond to the IBM signals (in the DB-15 connector.) Does anyone out there know the pinout for the Tandy 6-pin DIN connector, and how or if they correspond to the IBM pinout? The IBM connector is as follows: DB-15 pin Function ---------- ------------------------------------ 1 +5 vdc 2 button 0 3 position 0 4 ground 6 position 1 7 button 1 8 +5 vdc 9 +5 vdc 10 button 2 11 position 2 12 ground 13 position 3 14 button 3 15 +5 vdc So far, I have the ground and buttons figured out, but can't figure out how the potentiometers are connected. Any help would be greatly appreciated! Thanks in advance - Bill Warner wtw101@psuvm