mlefebvr@ireq.hydro.qc.ca (Marc Lefebvre) (04/11/90)
I am trying to install an ATI Small Wonder Graphics Solution card in my early model 1000. This card was given to me without any manual. I've installed the card, connected my Tandy composite video monitor to the RCA jack on the card, powered-up and found nothing more than a blank screen (semi-expected, I guess). So I changed some settings on the card's 4 dip switches and found out that toggling switch number 1 made the difference between no output and _some_ output to the monitor. By _some_ output I mean that every time a program sends a line to the screen (may it only be a few characters), there is nothing more than "snow" on that line, along the entire screen width. The CGA on the motherboard seems to keep on working at all times. Please send any response by email if possible. Thanks. Marc Lefebvre, IREQ: Institut de Recherche d'Hydro-Quebec Analyste / Analyst. 1802 Montee Ste-Julie, Varennes, Prov. Quebec, CANADA J3X 1S1. mlefebvr@ireq.hydro.qc.ca Tel: 514 652-8554 fax: 514 652-8555 -- Marc Lefebvre, IREQ: Institut de Recherche d'Hydro-Quebec Analyste / Analyst. 1802 Montee Ste-Julie, Varennes, Prov. Quebec, CANADA J3X 1S1. mlefebvr@ireq.hydro.qc.ca Tel: 514 652-8554 fax: 514 652-8555