gklimes@gmuvax2.gmu.edu (George Klimes) (05/28/90)
Someone mentioned that Micro Mainframe is the only remaining source for an expanded memory board for the 1000SX. Well, I have another source. The company is "Computer Mechanix" in Michigan. The specialize in Tandy computers and sell all kinds of stuff for the 1000 and other models (even high density floppy controllers for the 1000 series). Give them a try at 800-448-1436. --- George -- "People think I'm some moron who drives a Trans Am" - Burt Reynolds "Make mine a GTA!" - Me
garylee@victoria.scl.cwru.edu (Gary Lee) (05/30/90)
In article <46@gsy1.UUCP> root@gsy1.UUCP (SysAdmin N4BBB) writes: >In article <7793@uhccux.uhcc.hawaii.edu>, roberta@uhccux.uhcc.hawaii.edu (Roberta Hodara) writes: >> >> How can I add extended/expanded memory to a tandy 1000 sx ? Do I >> need to add any chips to mother board ? Is it possible ? > >Micro Mainframe makes the only remaining expanded memory board still ^^^^ Not so my friend! >available for the 1000. No extended boards are around as far as I know. >Tandy has a 900 part number for this board, it's in the computer catalog. >No other main board chips are needed. > > >-- >-- >Scott Yates, N4BBB o o DOMAIN: gsy @ gsy1.JOBSOFT.COM >Yates Pest Control \ / UUCP: ...!raider!gsy1!gsy >Rockvale,Tennessee (OO) TCP/IP: 44.34.50.24 n4bbb @ ampr.org >"Bugs are my Life!" <> VOICE: (615) 274-2156 / (615) 459-2636 The following was snatched from Compu$erve. ------------------------------------------------------ 30508 S5/T1000/1400/3000/4K 10-Apr-90 09:24:25 Sb: #30294-#LIM 4.0 Tandy TX Fm: Vince Wu-InvisiSOFT 76266,320 Thanks to walt myers, I finally found this forum. Invisible EMS has 18 combination sockets for either 256 or 1 meg DIP; to correspond to 512K or 2 meg RAM. The quotation for $480 is: $299.95, $171 for2 Meg, Shipping, & COD. It is the lowest cost true hardware EMS 4.0 board on the market. Evidently, it is the only hardware EMS 4.0 board less than 10 inches in length. I'll be supporting our product in this forum...Thank you for your interest. Vince ------------------------------------------------------ You may write Vince at 76266.320@compuserve.com , but I don't know if he knows how to use the internet bridge. The phone number for his company (he is VP), is 415-570-6017 (InvisiSOFT). Some of the people over there even have reported that they managed to get somewhere in the range of 704K using the backfilling method (whatever that means B-). Regards, Gary