ccc_simon@waikato.ac.nz (Simon Travaglia) (07/12/90)
In article <8293@ur-cc.UUCP>, ttak@uhura.cc.rochester.edu (Timothy Takahashi) writes: > In article <985.2699e85d@waikato.ac.nz> ccc_simon@waikato.ac.nz (Simon Travaglia) writes: Ok, some more info: How do I ACCESS the ports. This is a portable model, and on the LHS there is something like a 9 pin D socket, then there's an RS232 socket at the back, and another socket which for the moment eludes me, plus a phone and a cassette socket. 1. How do you talk and listen to the RS-232 socket? From Basic? How do I change Baud rate, Parity and 7/8 bit settings? 2. What do the pinouts on the Phone socket do, and does ANYONE have any info on how to use them? Plead plead. 3. What does the 9 pin D socket at the side do? 4. What does the memory battery enable switch on the bottom do? {I think it's called that} 5. What can one do if one has no info on the TRS at all? I wouldn't be averse to writing an EPROM to plug in, if I knew (1. What CPU I'm writing for, 2. where I can get some info and 3. If it would work) 6. Last and most, are there any (no, rephrase that) WHAT special or Specialised basic commands are there in TRS-80 model 100 basic? Phew! The total information I have at hand is: It's a TRS80-Model 100- Portable, with something like 23K free at any one time. I know no more than this. Thanks one and all - SimonT +-----------+ Terminal Sticker: "My other terminal is a chunk of shit too" |+----+ | +----------------------------------------------------------+ || | | | Simon Travaglia, Computer Services, University of Waikato| |+----+VT100| | Priv. Bag, Hamilton, New Zealand. spt@grace.waikato.ac.nz| +-----------+ +----------------------------------------------------------+ The less some people know the more eager they are to tell you about it.