[net.wanted] Anyone else experience strange problems with ADM3A terminals?

taylor@sdccsu3.UUCP (03/31/84)

I have a strange problem on the adm3a terminal that I am using: when
it recieves a control-G (ASCII 007) it chokes and sends strange 
characters to the screen then just tunes out for a second....

The settings are;

	bit 8 is '0'
	parity is 'Enabled'
	'2' stop bits BITS
	'7' data bits
	'EVEN' parity
	Lowercase Enabled

	'AUTO NL' enabled
	RS232 line active
	'FDX' enabled
	and receiving at 1200 baud...

	It's going through a LSR Robotics Password 300/1200 Baud modem...

	(It's actually a big problem since I cannot log onto the computer
	 without receiving ^G sequences, which cause the terminal to do
	 wierd things.)

	(comments concerning outdated equipment etc should be routed to
	 /dev/null as appropriate.....)

			Thanks!

							-- Dave Taylor
							UCSD