blee@plains.NoDak.edu (Blaine Lee) (02/24/91)
I guess I have a few questions to ask... I would like to do the upgrade to 12MHz, but how can I tell if I have the 6000 board? I have two different boards one has a date of 1981 on it and I am quite sure it is a 16 board since the references in the mod don't correspond. Unfortunatly the other is being used right now, and I forgot to write down a description before replacing it :^( ... but I do remember two things, U1 was not a 74F32 (not any type of 32), but moving a jumper to E5-E7 would make sense (it was near the 24MHz oscliator) Second has anyone used the 68000 board for another project? I would be interested in the results, since as I understand it, it is basicialy a full system on a board (two with memory...) Ocassionialy something goes wrong when I use kermit during a terminal emulation session, not file transfer. It starts out when I hear the hard drive seek several different locations. Then everything becomes very slow, the only way to fix this is to escape back to local and quit, then restart kermit. Is kermit creating some huge data area that forces swaps after a while? I did compile it myself using OS 3.2 DEV 3.0.1 and kermit 4E(072). And all logs are set to 'none'. Thanks Blaine Lee blee @ plains.nodak.edu