[comp.sys.tandy] SERIAL PRINTER FROM CHEAP 4-PORT BOARD

bill@camco.Celestial.COM (Bill Campbell) (04/05/91)

I want to hook a printer to a Tandy 25-4031 4-port board using an
Intellicom 16K Serial->Parallel buffer using the default (DCE)
configuration on the 25-4031.  My question is whether hardware
handshaking will work with this board and which pin controls
hardware handshaking on the board.  TFM has all the jumper
settings, schematics, etc, but no DB-25 diagrams.

I use these buffers with Specialix boards which are also DCE and
the handshaking is on pin-4 on the Specialix.

I would like to be able to set up the buffer and send it to
someone without having to drive a hundred miles to make it work.

Thanks

Bill Campbell
-- 
INTERNET:  bill@Celestial.COM   Bill Campbell; Celestial Software
UUCP:   ...!thebes!camco!bill   6641 East Mercer Way
             uunet!camco!bill   Mercer Island, WA 98040; (206) 947-5591