jeff@dsndata.uucp (Jeff Minnig) (01/05/90)
Yup, It's me again... :-)
System: 9000/370
OS: HP-UX 6.5
RMB/UX: 5.51
Display: 98547
When I boot RMB/UX under X I get the following message:
"Error: Cannot open graphics device file using type 300h."
I've been thru the config and install manual for RMB/UX and
couldn't find the fix. Is this a bug with 5.51 and X windows,
or am I just missing something?
Thanks in advance
-jeff-
--
----------------------------------------------------------------------
I said it, not the people I work for.
----------------------------------------------------------------------
Jeff Minnig | LL: (402) 476-8278
Design Data |
1033 'O' St. Suite 324 | net: {hpfcla,mcmi,unocss}!dsndata!jeff
Lincoln NE 68508 |
----------------------------------------------------------------------
----------------------------------------------------------------------larryc@hpislx.HP.COM (Larry Corsa) (01/12/90)
Jeff, I'm not sure if there is anything in the HPBASIC/UX documentation that would have guided you through this, but I have it on good authority that the 6.5 release of the X window driver requires that BASIC have the shell variable SB_DISPLAY_ADDR set. Try putting this in your .profile: SB_DISPLAY_ADDR=0x0b00000 export SB_DISPLAY_ADDR Regards, Larry Corsa HP-Measurement Systems Operation