huber@aut.UUCP (Daniel Huber) (05/07/90)
I tried to set up uucp connections to other computers on our ethernet. But UUCP over TCP/IP seems not working with HP-UX 7.0 and 835S. I have HDB on both sides, or uucp version 2. HP9000/835S called is "aut" (HDB), other machine is NCR Tower 650 SysV.2 (HDB) called "telsys", or a Plexus P75 SysV.2 (uucp V2) called "autte". Here are my File entrys: Systems: telsys Any telsys Any nophone "" \d "" \r ogin: nuucp ssword: uucpuucp autte Any autte Any nophone "" \d "" \r ogin: nuucp ssword: uucpuucp Devices: I tried many different entrys telsys - - Any TCP or telsys TCP - Any TCP or telsys TCP - - TCP and more.... (similar entrys for autte) Permissions: #entry for system called "telsys" MACHINE=telsys LOGNAME=nuucp \ SENDFILES=yes REQUEST=yes CALLBACK=no \ READ=/usr/spool/uucppublic \ WRITE=/usr/spool/uucppublic \ COMMANDS=rmail:uux:uucp:pr #entry for system called "autte" MACHINE=autte LOGNAME=nuucp \ SENDFILES=yes REQUEST=yes CALLBACK=no \ READ=/usr/spool/uucppublic \ WRITE=/usr/spool/uucppublic \ COMMANDS=rmail:uux:uucp:pr And that's what Uutry means: # ~uucp/Uutry -r telsys /usr/lib/uucp/uucico -r1 -stelsys -x5 >/tmp/telsys 2>&1& tmp=/tmp/telsys mchFind called (telsys) conn(telsys) Device Type telsys wanted mlock - succeeded generic open failed, errno = 9 getto ret -1 Call Failed: CAN'T ACCESS DEVICE exit code 101 Conversation Complete: Status FAILED What's wrong? Does HP not support UUCP over TCP/IP ? Please e-mail, if you can help me. Thanks Daniel -- Daniel Huber Tel. +41 31 52 96 64 Ascom Autelca Fax. +41 31 52 77 45 CH-3073 Guemligen email: huber@aut.uucp Switzerland uucp: uunet!mcsun!cernvax!hslrswi!aut!huber