[comp.sys.hp] Monitor for HP9000/840, 7.0

frank@hpuxa.ircc.ohio-state.edu (Frank G. Fiamingo) (05/31/90)

Does anyone have the HP Monitor program for HP-UX 7.0
for an HP9000/840?  We found this program to be quite
useful under 3.1.  Now that we've upgraded to 7.0 not
all of the screens are working.

Thanks,
Frank Fiamingo
frank@hpuxa.ircc.ohio-state.edu
-=-
Frank Fiamingo
frank@hpuxa.ircc.ohio-state.edu
(614)292-4843

shankar@hpclscu.HP.COM (Shankar Unni) (06/01/90)

> Does anyone have the HP Monitor program for HP-UX 7.0
> for an HP9000/840?  We found this program to be quite
> useful under 3.1.  Now that we've upgraded to 7.0 not
> all of the screens are working.

Dig out the 7.0 update tape and look around for the fileset "USRCNTRB"
(under the OS_CMDS partition). This fileset contains contributed utilities
like "monitor".
-----
Shankar Unni                                   E-Mail: 
Hewlett-Packard California Language Lab.     Internet: shankar@hpda.hp.com

paul@prcrs.UUCP (Paul Hite) (06/08/90)

In article <1340122@hpclscu.HP.COM>, shankar@hpclscu.HP.COM (Shankar Unni) writes:
> Dig out the 7.0 update tape and look around for the fileset "USRCNTRB"
> (under the OS_CMDS partition). This fileset contains contributed utilities
> like "monitor".

I tried this and I found no USRCNTRB in the OS_CMDS partition.  If it had been
present, I assume that this software would already be on my 7.0 systems because
I loaded everything.  I believe that you HP types get stuff on your customized
tapes that we customers do not get.  And the original poster's address implied
that he was a customer.  There is a 7.0 version of monitor on my support tape,
but there's no /usr/contrib/lib/monitor.help to go with it.  Still it's better
than nothing.  To extract monitor from a support tape, use:
	mt fsf 6 -t /dev/rmt/0hn 
	tar xvf /dev/rmt/0h ./usr/contrib/bin/monitor

Paul Hite   PRC Realty Systems  McLean,Va   uunet!prcrs!paul    (703) 556-2243
                      DOS is a four letter word!

rer@hpfcdc.HP.COM (Rob Robason) (06/13/90)

shankar> Dig out the 7.0 update tape and look around for the fileset
shankar> "USRCNTRB" (under the OS_CMDS partition).  This fileset
shankar> contains contributed utilities like "monitor".

I think this fileset is only on the SE tapes.  Contact your SE.

Rob Robason