[comp.sys.hp] HP 2622A terminal - connector pinout needed

medli@hpcuhd.HP.COM (Dave Medlicott) (06/26/90)

> the cable between our 8channel no-modem-control mux on the
> 9000/500 and the 2622A i have as console is labelled as
>
>        US MODEM CABLE
>        13222-600001 N
               ^^^^^^
There's one too many 0's there. It should be 13222-60001. It is available
via the HP Direct line - 800 538-8787 for $95. The pin-outs are:


		50 Pin Connector(male)	 25 Pin Connector(male)
		
			 7			24
			 9			22
			12			 2
			13			 4
			14			20
			15			11
			40			23
			41			15
			42			 3
			43			17
			44			 5
			45			 6
			46			 8
			47			12
			48			 7

Note, I do not know if this is the cable you need. My documentation says 
this cable is used as: 262X Terminal connection to HP 1000, 2000, 3000
multiplexors; 103A; 202C, D, S, T; 212A and VADIC modems; Acoustic
Couplers (signal compatible only). For specific applications, I recommend
getting your sales rep involved.

Dave Medlicott
Data Systems Operations