mikezi@shark.UUCP (05/02/84)
****
As of May 4, 1984 I will no longer be working for Tektronix. I am
looking for a position in digital design, microprocessor systems,
system intergration, and IC design. I have both hardware and
software design experience.
Relocation, prefer the northwest, but would consider other locations.
If interested, please use my home number (1-503-289-7734).
Resume of:
Michael James Ziuchkovski Telephone: (503) 289-7734
9201 N. Endicott Ave. or (503) 685-3424
Portland, Oregon 97217
OBJECTIVE: A highly technical engineering position, working with
software/hardware system design. Would like about 60% digital/IC
design and 40% software/firmware design.
EXPERIENCE:
TEKTRONIX, INC., WILSONVILLE, OR
2/83 to 5/84: Software/Hardware Eng. III -- Project leader of a
group of four(4) people integrating a new technical concept into
the Engineering Computing System group and evaluation of mono-
chrome monitors.
8/82 to Present: Assistant Professor at University Of Portland --
Classes taught included Voice Systems (emphasis on voice recogni-
tion), Microprocessor Hardware Software Labs, and Senior Project
Design.
11/81 to 2/83: Software/Hardware Eng. II -- evaluation and
integration of new technology into the Information Display Divi-
sion. Project leader on the design of an HMOS integrated cir-
cuit.
5/79 to 11/81: Software/Hardware Eng. II -- lead firmware
engineer for the 4025A/4027A terminal project, designed 6800/6809
processor board, designed Polling I/O Controller Board used for
both Burroughs and Honeywell computers, and miscellaneous pro-
jects for Terminals and Displays Custom Products.
12/77 to 5/79: Technical Writer II -- wrote service manuals for
the following products 4052/4054 and 4081 Floating Point Proces-
sor.
PROGRESS ELECTRONICS, PORTLAND, OR
5/77 to 12/77: Technical Writer -- wrote service manuals for
hydroelectric control and monitor system.
HILLIBRANDTS BUSINESS MACHINES, PORTLAND, OR
1/76 to 5/77: Service Technician -- repaired Burroughs and NCR
mechanical and electronic machines.
ROBERT'S BUSINESS MACHINES, PORTLAND, OR
4/75 to 10/75: Service Technician -- repaired Burroughs and NCR
mechanical and electronic machines.
- 2 -
BURROUGHS BUSINESS MACHINES, HONOLULU, HA
8/71 to 12/74: Service Technician -- repaired Burroughs mechani-
cal and electronic machines.
US COAST GUARD, WASHINGTON, D.C.
3/67 to 3/71: Engineman Third Class -- repaired and serviced
small engines to large diesels.
EDUCATION:
1982 Yordon Structured Analysis seminar.
1981 MS (Electronic Engineering) University of Portland. Emphasis
on digital circuits, VLSI design, and software, with minor in
project design and business.
1981 -- Project Management seminar.
1980 -- Yordon Structured Design seminar.
1977 -- BS (Electronic Engineering) University of Portland.
Emphasis on digital circuits, computers and microprocessors, and
software.
1971 to 1974 -- Various technical classes put on by Burroughs.
1965 to 1966 -- Estherville J. C., classes in Mechanical
Engineering.