lrb@alex.ctrg.rri.uwo.ca (3787 x4108) (01/30/91)
i need a small proggie to control a modem (basically hang it up). unattended.
i had one on the 540, but the code does not port, i get
(send:) AT\r
(get: ) O<timeout>
(send:) AT\r
(get: ) K\rO<timeout>
(send:) AT\r
(get: ) K\rO<timeout>
that last K of OK is not seen until the next is sent. sigh. I immediatly tried
the dialers.c program, and while it works from under uucico/cu, it will NOT work
(try "/usr/lib/dialer ACUHAYESSMART /dev/portname 555-1212 2400" see what
i mean.....)
1) what does uucico/cu do to set up the line differently?
2) where is latest kermit-type source for an example of how to do this
correctly?
--
Lance R. Bailey Systems Manager box: Robarts Research Institute
email: lrb@rri.uwo.ca Clinical Trials Resources Group
fax: 519.663.3789 P.O. Box 5015, 100 Perth Dr.
vox: 519.663.3787 ext. 4108 London, Canada N6A 5K8