RBL4@PSUVM.BITNET (Robert B. Lipton) (06/18/88)
This is a posting for a friend, also
------------------------------------------------------------------------------
I just got a Volksmodem 6480 and was wondering if anyone figured out how
to program it (to dial, off hook, send carrier...) I'd like to use a
color graphic terminal instead of the ASCII one they supplied with the modem.
Tony
------------------------------------------------------------------------------
BITNET: RBL4 AT PSUVM
UUCP: %s!psuvax1!psuvm!rbl4elg@killer.UUCP (Eric Green) (06/20/88)
in article <45537RBL4@PSUVM>, RBL4@PSUVM.BITNET (Robert B. Lipton) says: > I just got a Volksmodem 6480 and was wondering if anyone figured out how > to program it (to dial, off hook, send carrier...) I'd like to use a > color graphic terminal instead of the ASCII one they supplied with the modem. > Tony Re: programming: Good luck. Anchor uses one of the CIA's timers to provide the timebase for the modem. The information's out there. But it's not an easy task. Re: color graphic terminal: There's tons of C/G terminals that support the 6480. I was browsing Q-LINK a few nights ago, and there were 4 or 5 C/G terminals that supported the 6480. I didn't download any of them, though, so can't tell you much more (I have a monochrome monitor here on my 128, so what use is a color terminal program?). Try your local Commodore computer club, they may know more than I. Eric -- Eric Lee Green ..!{ames,decwrl,mit-eddie,osu-cis}!killer!elg Snail Mail P.O. Box 92191 Lafayette, LA 70509 "Is a dream a lie if it don't come true, or is it something worse?"