macbeth@artecon.artecon.UUCP (Beckwith) (04/23/87)
I'm posting this for a friend. Thanks in advance for any help you can provide.
==============================================================================
Here's the scenario:
MacPlus and IBM PC XT connected via Apple Talk with TOPS networking software.
The Mac has an HD20 hard disk published on the network as a single volume. The
PC has the HD20 mounted as volume H:. An ALLOY 1/4" tape backup is attached to
the PC running ALLOY Tip6 software.
What I am trying to do is use the ALLOY tape backup to backup H:/*.* (i.e. the
HD20 over the network). It works fine for a while but then stops before comp-
leting the backup. The place where it stops is random.
Any ideas how I can make this work?
==============================================================================
--
===============================================================================
+ The Company supports my family, not my opinions. +
+ David Macy-Beckwith +
+ {hplabs|sdcsvax|ncr-sd|hpfcla|ihnp4}!hp-sdd!artecon!macbeth +