fitz@cive.ri.cmu.edu (Kerien Fitzpatrick) (09/21/87)
I am running CAP on two Kinetics FastPath boxes to connect our Mac network to the University ethernet. I would like to use some of the printing utility software that is part of the CAP package. I have compiled the utility called "lwpr" which is used to print files from a Vax through the FastPath box to a LaserWriter that is on AppleTalk. In order for this to work I need to setup a file called "atalk.local". The format that I am using does not seem to work (I compiled the utility "look" and it cannot see anything at all...just responds "? Open Failed".). The format I am using is detailed below. #mynet mynode myzone 50.254 177 FRC #bridgenet bridgenode bridgeIP 50.44 10 128.2.44.10 The IP address of the mainframe I am on is 128.2.254.177 and the IP address of the FastPath box is 128.2.44.10. The zone of my Mac network is called FRC. Can anyone tell me if this format is correct? Does anyone have an idea what I could be doing wrong? Any help would be appreciated. Kerien Fitzpatrick Field Robotics Center Robotics Institute Carnegie Mellon University fitz@cive.ri.cmu.edu (412)268-6564