fons@uxe.cso.uiuc.edu (01/29/88)
Does anyone out there have in front of them the pinouts for the imagewriter
cable. I can get the connectors for the cable without problem, but I don't
have the pinouts or the tech ref for the imagewriter. If you don't mind please
email me a copy. Thanks in advance.
U.S Mail: Paul Fons
Univerity of Illinois at Urbana Champaign
Coordinated Science Laboratory
1101 W. Springfield
Urbana, Illinois 61801 (207)-333-7080
Internet: Fons@vmd.cso.uiuc.edu or Fons@uxe.cso.uiuc.edu
Bitnet: Fons@uiucvmd
CSnet: Fons%vmd@uiuc.csnet Fons%uxe@uiuc.csnet
UUCP: [ihnp4,uunet]!uiucuxc!fons@vmd [ihnp4,uunet]!uiucuxc!uiucuxe!fonsLou@cup.portal.com (02/03/88)
Paul Fons requested pinouts for the ImageWriter printer. Assuming he is referring to the ImageWriter I, here is the information: Data Input Form: 7 or 8 data bits, 1 start bit, no parity Baud Rate: 300, 1200, 2400, or 9600 baud Buffer: 1K bytes Printer Connector: DB-25male Mating Connector, DB25S female 13 12 11 .. .. .. .. .. .. .. 3 2 1 o o o o o o o o o o o o o o o o o o o o o o o o o 25 24 23 .. .. .. .. .. .. 16 15 14 Pin # / Symbol / Description / Direction 1 FG Frame Ground (output) 2 SD Send Data (Output) 3 RD Receive Data (Input) 4 RTS Request to Send (Output) 7 SG Signal Ground 14 FAULT Fault (Output) 20 DTR Data Terminal Ready (Output) ******************** Hope that helps you