faber@husc4.HARVARD.EDU (joseph faber) (02/10/88)
Apple's new LaserWriter II is a beauty! However, its new compliment of ports, ADB, SCSI, and LocalTalk, do not allow the usual fix for getting rid of the usual Startup Page. As I understand it, the previous fix was (taken from a text file posted in 1986 to CompuServe): "Change setting on LaserWriter to 1200 baud. Connect a DB-9 to Mini-8 cable from a Mac Plus to the LaserWriter. Run a terminal program set to 1200 baud, 8 bits, 2 stop, no parity. Type: executive[cr] LW: PostScript(tm) Version 23.0 Copyright(c)1984 Adobe Systems Incorporated. PS> Type: serverdict begin 0 exitserver statusdict begin false setdostartpage[cr] LW: %%[ exitserver: permanent state may be changed ]%%" Well, I assume the same dialogue with the Postscript driver is appropriate, the question is, how do you do it? Apple notes briefly in the owner's manual that the LaserWriter II NT will always print the startup page unless you have changed the Postscript setting. I would really appreciate any help on this. Joseph Faber
straka@ihlpf.ATT.COM (Straka) (02/15/88)
In article <4022@husc6.harvard.edu> faber@husc4.UUCP (joseph faber) writes: |Apple's new LaserWriter II is a beauty! |However, its new compliment of ports, ADB, SCSI, |and LocalTalk, do not allow the usual fix for getting rid |of the usual Startup Page. ... |Type: serverdict begin 0 exitserver statusdict begin false | setdostartpage[cr] |LW: %%[ exitserver: permanent state may be changed ]%%" ... |Apple notes briefly in the owner's manual that the LaserWriter |II NT will always print the startup page unless you have changed |the Postscript setting. I have no idea whether it works on the LW II, but the Widgets program included with DiskTop has a function which enables/disables the Startup Page Printing of the LW. A call to CE software might be in order. (Normal disclaimers, ...) -- Rich Straka ihnp4!ihlpf!straka Advice for the day: "MSDOS - just say no."