sdy@ssc-vax.UUCP ("Sukebe") (03/24/88)
I have a 512e (128->512 Dr. Dobbs with socketted memory + the apple 128k rom upgrade). I will soon have access to 4 256k simms (= 1Meg right?) is there any memory upgrade that will allow me to take advantage of these simms or will I just have to settle for something like a populated DOVE board? Also since I have sockets and the piggybacked address decoder which memory upgrade boards will fit with the minimum of modification? My friend with a similar upgrade (non piggybacked address decoder -- his was a plug in board) had to cut two (4?) sockets off to make his DOVE 512->1Meg board fit. Oh my goal is 2Meg with the ability to add an SCSI port -- and since I'm now older and less daring the less I have to hack my board the better -- the 128->512 upgrade was close to my hardware limit and that was 3years ago. Besides it works fine now and I don't want to break it but I do need the memory so I can start playing with Hypercard etc. -- Steven D. Yee >>> my employer does not share my opinions <<< uw-beaver!ssc-vax!sdy >>> (that's because I'm always right! ;-) <<< (chant) We want more! We want more! We want more lines than four!!!!!!!