laser@pnet06.cts.com (Steve Jurovich) (05/21/88)
I have a 5MB Mac II with a 90 MB internal drive. I am attempting to program data acquisition/process control programs in MS Basic and it seems that whenever I direct ASCII output to a serial port, the Mac crashes hard, ie unrecoverably. I've traced it to a single line of code that sends an ASCII string to the modem port. I have Macsbug installed but cannot trap on the error because the crash affects all running program; the only recovery is rebooting. Is there anybody out there with a patch to fix this problem? Thanks, Steve Jurovich 415-423-1123 UUCP: {crash uunet}!pnet06!laser ARPA: crash!pnet06!laser@nosc.mil INET: laser@pnet06.cts.com