lim@iris.ucdavis.edu (Lloyd Lim) (01/17/89)
I have narrowed down an INIT conflict to On Cue 1.0 and TMON 2.8.1. The two
INITs cause an ID=2 error during system startup. This occurs on my Mac Plus
with System 6.0.2. This does not occur on Mac SE's or Mac II's that I use at
work. I have removed all other INITs, CDEVs, and RDEVs to make sure that these
are the ones causing the problem.
Has anyone else noticed this problem? Are there new versions to fix this bug?
My apologies if this has been noted before and is old news.
+++
Lloyd Lim ARPANET: lim@iris.ucdavis.edu
US Mail: 146 Lysle Leach Hall, U.C. Davis, Davis, CA 95616Fabian@cup.portal.com (Fabian Fabe Ramirez) (01/19/89)
Lloyd, Have you tried renaming the INITs? I personally have TMON 2.8.1 loading before On Cue 1.3 by renaming the TMON Startup to " TMON Startup" and things work fine. Fabian Ramirez SuperMac Technology fabian@cup.portal.com sun!cup.portal.com!fabian
fiver@cup.portal.com (Kevin D Dack) (01/19/89)
I haven't noticed an error at system startup, using On Cue 1.0 and TMON 2.8.1, but lately every now and then I'll get a bomb on an odd address error (some is accessing location 0Dh as a word). I hadn't thought to suspect TMON and On Cue, since the problem started just recently (after I installed new Pyro and Suitcase). Are there any problems that anyone knows about with these? kevin dack fiver@cup.portal.com
leonardr@uxe.cso.uiuc.edu (01/24/89)
lim@iris.ucdavis.edu(Lloyd Lim) writes in comp.sys.mac >I have narrowed down an INIT conflict to On Cue 1.0 and TMON 2.8.1. The two >INITs cause an ID=2 error during system startup. This occurs on my Mac Plus >with System 6.0.2. This does not occur on Mac SE's or Mac II's that I use at >work. I have removed all other INITs, CDEVs, and RDEVs to make sure that these >are the ones causing the problem. > >Has anyone else noticed this problem? Are there new versions to fix this bug? >My apologies if this has been noted before and is old news. > Considering that the same company, ICOM Simulations markets/develops both products, I find this hard to believe (also I use them both myself without mishap). The currently version of On Cue is 1.3, and I would suggest that you get an update (as that may be part/all of the problem). You can contact ICOM Simulations at: 648 S. Wheeling Rd. Wheeling, IL 60090 (312) 520-4443