markham@tsc.cs.unc.edu (Andrew Markham) (02/21/89)
Does anyone know if it is possible to use MacroMaker for issuing a ShutDown command? The problem I see is that when you use MacroMaker to define a macro, you must perform the macro and then save it in MacroMaker. Of course, shutting down the Mac would not allow you to save the macro. Ideally, I would like to be able to hit a Control-F1, or something of the sort, in order to shut my Mac SE down. Also, does anyone have any ideas about the possibility of configuring a Mac SE so that a ShutDown command in the Finder will do a "true" shut down (i.e. like on a Mac II). If there is any hardwiring to be done, which I assume there would be, could it be done by a novice electrician, or would you advise skipping this option? Thanx for any and all help, Andy Markham (markham@sunmail.cs.unc.edu) Computer Science Department University of North Carolina at Chapel Hill P.S. Please respond via e-mail or post to comp.sys.mac
AXS101@PSUVM.BITNET (Adrian Sullivan) (02/24/89)
In article <6875@thorin.cs.unc.edu>, markham@tsc.cs.unc.edu (Andrew Markham) says: >[stuff about macromaker that was answered already] >Also, does anyone have any ideas about the possibility of configuring a Mac SE >so that a ShutDown command in the Finder will do a "true" shut down (i.e. >like on a Mac II). If there is any hardwiring to be done, which I assume >there would be, could it be done by a novice electrician, or would you >advise skipping this option? >Thanx for any and all help, >Andy Markham >P.S. Please respond via e-mail or post to comp.sys.mac > please post any info on this. also, anyone who has played with an SE/030, does it work like the ][ with the P-up key and shut down stuff? one thing i always liked when using a friends ][ was the startup and shutdown, so simple, no switches or anything. Adrian Sullivan, Vice President PAMUG axs101@psuvm.bitnet or axs@psuarch.bitnet ----------------------------------------- Little Mac BBs If you'd like info on the users group, | (814) 238-4276 e-mail me and I'll send some out to you. | 2400/1200 bps | 8-n-1 24hrs.
kehr@felix.UUCP (Shirley Kehr) (02/24/89)
In article <6875@thorin.cs.unc.edu> markham@tsc.cs.unc.edu (Andrew Markham) writes:
<Also, does anyone have any ideas about the possibility of configuring a Mac SE
<so that a ShutDown command in the Finder will do a "true" shut down (i.e.
<like on a Mac II). If there is any hardwiring to be done, which I assume
<there would be, could it be done by a novice electrician, or would you
<advise skipping this option?
I was a little disappointed that the SE/30 does not startup and shutdown
like the Mac II also. The nice opening chord is there, but no keyboard
on switch. What is so different about the SE and Mac II that they turn on
and off differently?
Shirley Kehr
samalone@athena.mit.edu (Stuart A. Malone) (02/27/89)
>I was a little disappointed that the SE/30 does not startup and shutdown >like the Mac II also. The nice opening chord is there, but no keyboard >on switch. What is so different about the SE and Mac II that they turn on >and off differently? > >Shirley Kehr I suspect the reason is that with a Mac SE or SE/30 the power switch is attached to the monitor, which is pretty much guaranteed to be within arm's reach. The Mac II's CPU can be hidden under a table, which forced Apple to put the power switch somewhere more accessible. Apple probably saves a few dollars on each SE and SE/30 by using the simpler power switch. --Stuart A. Malone