paf@nada.kth.se (Patrik F{ltstr|m) (10/19/89)
HP-laserJet. According to the manual of the printer, one must
run "System Configuration Program" (or something like that) on
the Mac to set the serial port correctly. Isn't that something
that the printerdriver should do? I do have the right cabels etc.
When I print something on the Mac, only deferred characters i written
by the printer (like the characters on a terminal with wrong speed,
or wrong nr of bits set), one sheet of paper is ejected and then
the printer looses the connection with the Mac (error nr 40 on the Jet).
Please reply by mail to me <paf@nada.kth.se> and I'll
will sum the responses here!
Patrik F{ltstr|m <paf@nada.kth.se>
Numerical Analysis and Computer Science
Royal Institute of Technology
Stockholm, Sweden