petechen@steely.rutgers.edu (Peter Chen) (01/22/90)
Hi, Recently I moved a Jasmine Direct Drive 100 because the room was getting repainted. It was originally connected to a Mac SE with an external 20 meg drive. When I finally put the system back together, namely, the Mac SE, Direct Drive 100, abd the 20 meg drive, the 20 meg drive mounted correctly after startup, but Direct Drive 100 didn't. I ran the Jasmine DriveWare. Direct Drive 100 showed up after the SCSI bus scan, but none of the 4 partitions was recognized. I do have a backup, but it is somewhat outdated. My question is: is there any way of recovering the data? or is there any way to make the partitions recognizable? Peter Chen P.S. I had Guardian running on both drives.