david_islander_hughes@cup.portal.com (01/20/90)
First the good news: By ADDING a terminator (for total of 3!) in my scsi chain I was able to get everything working. Rodime is internal, so had to be 0, natc Thanks to all who suggested checking ID numbers, that was the first thing I di One responder suggested two capacitors on the scanner could be at fault. New problem (actually an old one I had just put on back burner:) Configuration: Mac2x, 4 mmeg/140 Rodime INT, Masterjuggler, usual intits, backfax, etc. Superlaserspool 5. will work (VERY occasionally) with PM 3.x. Mostly it just causes the system to freeze. Writes files Postscript 01, 02, etc. But 02 usually ends up outside the sls spool folder on the desktop. I have no clues on this one. I have tried renaming it, etc., but nothing seems to work. It seems to be just what I need in my net cofiguration, but not if it bombs. As an aside, does anyone have the fax number for Bay Area Computers in SF? Also need a demo or evaluation copy of Gofer II and Thunder II. Please e-mail. GOFER might be what we need in the archives of our old newspaper stories. I understand you can use a word or phrase like John H. Doe, and it will find every story with those words in it. Thanks out there in netland. You have been a world of help. It's tough to get good info here on Guam.
Fabian@cup.portal.com (Fabian Fabe Ramirez) (01/23/90)
David, First off...there is NO version 5 of SuperLaserSpool. The current version is 2.01. I'd recommend that you call our SuperMac BBS (408-773-4500) and download the text version of my tech note concerning SLS 2.0 and PageMaker 3.0x. Fabian Ramirez SuperMac Technology fabian@cup.portal.com