John.Starta@p90.f15.n114.z1.fidonet.org (John Starta) (03/10/90)
In article <1159@dftsrv.gsfc.nasa.gov> seiler@dftnic.gsfc.nasa.gov (Ed Seiler) writes: > When I try to use SunDesk on a IIci with a RasterOps 264 board, > everything is okay until I try to shutdown or restart. Then either > the shutdown sequence fails, or a system error occurs. Is anyone > able to use it with the IIci? Does anyone have an e-mail address for > Frederic Miserey? I've been using SunDesk on my IIci for quite some time now without a hatch. I have been doing so in 8-bit mode, however. You might give that a try (if you haven't already). Also, verify that you have the latest version (1.1). If after that, you are still experiencing trouble, e-mail me a detailed description of the problem and your hardware configuration and I'll make sure it gets to Frederic Miserey. John PATH: 114/15.90 -- Uucp: ...{gatech,ames,rutgers}!ncar!asuvax!stjhmc!15.90!John.Starta Internet: John.Starta@p90.f15.n114.z1.fidonet.org