st69@sdcc12.UUCP (03/12/87)
Oops... I made a mistake in my previous posting. The board from Douglas Electronics is not for EPROMs only, but is a generic prototyping board (which could be used with EPROMS, of course). It has holes spaced at 0.10 inches, 20 rows by 30 columns, with 8 rows dedicated to the power and ground busses. It fits the cartridge port perfectly. Here is the full info on Douglas Electronics: Douglas Electronics 718 Marina Blvd. San Leandro, CA 94577 415-483-8770 Visa and Mastercard accepted Again, the part number for the board is 33-DE-40, it cost $10.00, and it took 2 days from when I placed the order to when I got delivery. Tom Erbe (uucp: ucbvax!sdcarl!tre, genie: T.ERBE)