pete@utgpu.UUCP (10/31/87)
hi Everybody I have been trying for a while to get this information, I guess I'll have to try again... Does anybody out there in NetLand know the Pinout designations for a Tandon TM-100-2A Floppy disk drive? (I am talking here about the edge connector on the back of the drive. I would image that just about any Tandon 5.25 inch floppy drive would have the same pinout, so info on any model would be greatly appreciated. Thanks in Advance, Pete Santangeli ------------------------------------------------------------------------------- pete@utgpu (pete@utgpu@utai) (USENET) psantangeli (BIX) pete@UTORONTO (BITNET) "Argue for your limitations, And sure enough they are yours." -Richard Bach, Illusions.
Dion_L_Johnson@cup.portal.com (11/05/87)
In answer to this: Does anybody out there in NetLand know the Pinout designations for a Tandon TM-100-2A Floppy disk drive? (I am talking here about the edge connector on the back of the drive. I would image that just about any Pete Santangeli I have a Tandon OEM manual for model TM-100-1 and -2 which says: pins ground signal meaning 1 2 connector clamp 3 4 spare 5 6 select 3 7 8 index 9 10 select 0 11 12 select 1 13 14 select 2 15 16 drive motor enable (N MOTOR ON) 17 18 direction 19 20 step (N STEP) 21 22 Write gate 23 24 Track 00 25 26 Track 00 27 28 write protect 29 30 read data Does this sound like what you wanted? Good luck and write if you need more info. also at: ...uunet!sco!dionj