mj@myrias.UUCP (Michal Jaegermann) (11/20/87)
Recently posted "dcclck31.prg"a from Mike Vederman - "Double Click Software" - is still buggy. It does not return memory to OS. After every invocation it creates 300+ bytes of dead memory. And, when deinstalled, it does not return its memory at all. To see it for yourself - create a sizeable ram drive, in order not to wait too long - and click a number of times on "dcclck31.prg". Rather soon you will see "out of memory" message, and your only way out will be to reboot. You should be ok, if you just install the clock and will not touch it anymore. But still it will gobble down a quite sizeable memory chunk. This may be a bug in our belowed TOS (boo!!!) and maybe it disappeared with a new version. I cannot check. A behaviour described was observed on a plain old 1040 ST. Michal Jaegermann Myrias Research Corporation ...ihnp4!alberta!ZTdd!cdd!c