gibson@trwrb.UUCP (Gregory S. Gibson) (08/04/88)
I am in the process of replacing the power supply on my Atari Harddrive
Sh 204. The old power supply has two sources for +5VDC and two sources
for +12VDC. Each +5VDC and +12VDC line is separately connected to the
disk drive. One +5VDC line and one +12VDC line is connected to the logic
boards. One +5VDC line and one +12VDC line is connected to the drive
mechanism. The new power supply has higher amp rating. Is it necessary
to separate these connections?
Thank you for help
Gregory Gibson
gibson@trwrb.UUCP
--
Gregory Gibson
{...ihnp4,ucbvax}!trwrb!gibson