euloth@dalcsug.UUCP (George Seto) (10/13/88)
I seem to have an intermittent problem with the STadel 3.3 system. I am using an unmodified 520ST with Floppies. Now when I originally converted to the 3.3 back a few months ago, the conversion went fine, from the 3.1g. Then a week later, I tried to do a reconfigure, and the system would hang up after the configur.tos program got my reply to the question asking if I wanted to wipe the room, floor, log, or message files. always answered in the negative. I somehow got it going again. Well last night it happened again. Now I made NO changes to the ctdlcnfg.sys file at all. I booted the system and it got as far as clearing the screen. Then it hung. I hit reset and since there was no CTDLTABL.SYS file, I went to re-configure. It hung as described. I got a new copy of the configur.tos program. Still the same thing. Copied each of the files and they all seemed to copy fine. REally strange. Does anyone have any solutions? Help! Thanks in advance. George Seto . -- ******************************************************************************* * euloth@dalcsug.uucp || Disclaimer: All opinions are my own unless other- * * /\/\/\/\/\/\/\/\/\/\ || wise noted. * ****AKA: Atari Nut*************************************************************