THANSEN@cosmo.UUCP (Thorsten Hansen) (08/24/88)
Is there someone who can help me with a routine for the XModem transfer protocol? Perhaps someone has an example program for it. I would be thankful for any sort of help. In this case, send me a short message please. Thorsten Hansen THANSEN@cosmo.uucp West-Germany ------------------
csrobe@ICASE.EDU (Charles S. [Chip] Roberson) (03/17/89)
Has anyone had any success downloading using the BSD version of xmodem (v3.6) using the ymodem batch protocol? I am using Simon Poole's Uniterm (v2.0e) on an Atari 1040ST, and it *ALWAYS* craps out on the second file in either 128 or 1K packet size. Here is copy of my xmodem.log: ---------------------------------------------------------------------------- ++++++++ Sun Mar 12 13:55:22 1989 XMODEM Version 3.6 Command line: xmodem sbyd newsdisk.arc patch.arc quick_db.arc sbase.arc spell.arc sttarsrc.arc texshel2.arc uucico.arc Line speed = 2400 bits per second YMODEM Batch Send Started in binary mode ---- XMODEM Send Function File Name: newsdisk.arc File Size 32K, 255 Records, 32512 Bytes Estimated transmission time 2 minutes 32 seconds CRC mode requested Send Complete 254 Sectors Transfered in 2 minutes 37 seconds Transfer Rate = 207 Characters per Second ---- XMODEM Send Function File Name: patch.arc File Size 89K, 712 Records, 91023 Bytes Estimated transmission time 7 minutes 2 seconds CRC mode requested NAK on sector 8 NAK on sector 8 Non-ACK on sector 9 NAK on sector 9 Non-ACK on sector 10 NAK on sector 10 Non-ACK on sector 11 NAK on sector 11 NAK on sector 11 Non-ACK on sector 12 NAK on sector 12 NAK on sector 12 NAK on sector 12 NAK on sector 12 NAK on sector 12 NAK on sector 12 NAK on sector 12 NAK on sector 12 NAK on sector 12 XMODEM Fatal Error: Too many errors in transmission ---------------------------------------------------------------------------- I have the following set-up in the Uniterm File Transfer Dialog Box: Timeout after: 10 sec Max # of errors: 10 Accept Ascii NULL: YES Packet size: 1024 Error check: CRC Any clues? -c
poole@forty2.UUCP (Simon Poole) (03/25/89)
In article <8903161832.AA00420@icase.edu> csrobe@ICASE.EDU (Charles S. [Chip] Roberson) writes: >Has anyone had any success downloading using the BSD version of xmodem (v3.6) >using the ymodem batch protocol? I am using Simon Poole's Uniterm (v2.0e) on >an Atari 1040ST, and it *ALWAYS* craps out on the second file in either 128 >or 1K packet size. > I haven't had any problems down/uploading with Chuck Forsbergs programs on the Unix side (rb/sb). Note that UniTerm only automagically disables XOn/XOff flow control when called from the keyboard, not when called from a macro (this might be considerd a bug). Anyway what error message does UniTerm display? -- ---------------------------------------------------------------------------- UUCP: ...mcvax!cernvax!forty2!poole Simon Poole BITNET: K538915@CZHRZU1A ----------------------------------------------------------------------------