Z4648252@SFAUSTIN.BITNET (Z4648252) (01/09/90)
Hello all,
Does anyone know a U.S. source for project boards and connector
pieces that will fit the cartridge port. I don't want to mention my
experience at a local Tandy store when attempting to describe the size
of the trace runs and their spacing. (Uh, if you want to hear something
REALLY funny, ask a Tandy store if they have a socket that will fit a
68000 chip--never mind...sigh).
At any rate, a U.S. source would be appreciated. Thanks!!!
Larry Rymal: |East Texas Atari 68NNNers| <Z4648252@SFAUSTIN.BITNET>jpexg@wheaties.ai.mit.edu (John Purbrick) (01/11/90)
In article <900108.22294364.040310@SFA.CP6> Z4648252@SFAUSTIN.BITNET (Z4648252) writes: > Does anyone know a U.S. source for project boards and connector >pieces that will fit the cartridge port. Yes. Douglas Electronics, 718 Marina Blvd, San Leandro Ca 94577: 415-483-8770 Their cartridge port connector is part 33-DE-40, priced at $10.00 the last time I bought one a year ago; they take credit cards. Their connector is a board about 3" x 5" with the connector at one end and enough room for a few ICs and/or a 40-pin flat cable connector. John Purbrick jpexg@ai.mit.edu