goldman@timbuk.cray.com (Matt Goldman) (03/24/90)
Hello all! I'm looking for some software to drive a SCSI tape drive. The drive in question is a Teac MT-2ST/45S-24-U. My current setup is Mega-4, Supra host adapter, ABC-4070 with a 30 Mb drive, and a Shugart SCSI to MFM card with a 30 MB disk. I'd like to be able to use the Teac for backups and long term data storage. I'd also like pointers on how to write C code that will get at the SCSI bus. My compiler is Mark Williams C. Send me the information and I'll post a summary to the net NOTE: my e-mail address is goldman@ferris.cray.com, not goldman@timbuk.cray.com! Timbuk is the machine that I post from. Thanks! -- Matthew Goldman (612) 936-9675 goldman@ferris.cray.com It's real handy, havin' an Elder God in the band, eh?"
ens@ccu.umanitoba.ca (03/25/90)
In article <6901@timbuk.cray.com> goldman@timbuk.cray.com (Matt Goldman) writes: > >Hello all! I'm looking for some software to drive a SCSI >tape drive. The drive in question is a Teac MT-2ST/45S-24-U. > I am also looking for a driver for a SCSI tape drive: the exabyte 8mm (2 Gbyte) drive. I will be using it with low level SCSI calls for data logging but would certainly like a standard device driver for it. Any information on code for SCSI tape drives of any kind would be useful. (I will use the BMS200 SCSI interface). Thanks, Werner Ens Physics, U of Manitoba ens@ccu.umanitoba.ca