[comp.sys.atari.st] CONNER CP3500F HARD DISK

AKISUJAR@NUSVM.BITNET (05/09/90)

Hello from Singapore,

Could any one be kind enough to tell me how can I disable the SCSI parity
on the Conner CP3500F, 200MB hard disk.  There is no jumper on this one and
the drive comes with SCSI parity enabled from factory. On the 100MB Conner,
there are 2 pins that I can put the jumper on to disable SCSI parity.

ICD host adapter requires the Hard disk with SCSI disabled. Is it possible to
modify the ICD card to accept the SCSI parity enabled hard disk?

Any advise would be most appreciated.

Suthipuntha. School of Architecture, National University of Singapore
             AKISUJAR@NUSVM.BITNET