[comp.sys.atari.st] Non-Atari monitors on ST.

djw@hpldsla.sid.hp.com (David Williams) (10/23/90)

Has anyone tried  connecting any of the Tandy (from Radio Shack)
color monitors to an ST?

Radio Shack is selling the CM-8 for $179.95 at the  moment,  and
my guess is that it might work well.  The Tandy  color  computer
(which the CM-8 is designed  for) has an analog,  RGB+I, 60Hz, +
sound output. Which I think is the same as the ST out???

In fact, what color monitors  (apart from the Atari) have people
used with  success?  There is nothing wrong with the Atari, just
others are sometimes obtainable cheap.  If people write me, I'll
make up a summary, and post.

David Williams
___________________________________________________________________
Hewlett-Packard Scientific Instruments Division (SID) /\___________
1601 California Ave, Palo Alto, CA, USA. /\______________/\________
phone: 415 857 6100. FAX: 415 852 8011  //\\____________|__________
HP-UX Mail:  djw@hpldsla.hp.com         /  \____/\____/\___________
HPdesk:     (djw)hpldsla/HP1900/00     /\____________/  \__________

a1076@mindlink.UUCP (Robert Bell) (10/25/90)

hi david,
         i've been using a commodore 1084s with my st for over a year 9
now and think its great.Most rgb analog monitors will work with the st ,its
just a matter of making the right cable(getting the pin configuration is the
hardest part).As to the tandy monitors i'm not sure if they'd work,arn't they
digital?
--
-------------------------------------------------------------------
Robert Bell                       uunet!van_bc!rsoft!mindlink!a1076
Benndorf-Verster                  a1076@mindlink.uucp
Vancouver Canada                  voice 604-853-5870
-------------------------------------------------------------------