selick@bucsf.bu.edu (Steven Selick) (11/07/90)
Is it possible to configure Uniterm 2.0e to send a ctrl-d when the 'delete' key is hit? -steve selick@bucsf.bu.edu
rrd@hpfcso.HP.COM (Ray Depew) (11/08/90)
> Uniterm 2.0e
Okay, I'll asK: where can I get 2.0e? All I have is Uniterm 1.8. I promise
I'll mail in my SW fee when I get it...
Regards
Ray Depew
IC's by Bill and Dave
rrd@hpfitst1.hp.com
----------rrd@hpfcso.HP.COM (Ray Depew) (11/09/90)
>> Uniterm 2.0e > Okay, I'll asK: where can I get 2.0e? Thanks to all who emailed me with pointers. Regards Ray rrd@hpfitst1.hp.com ----------
rcdsdgx@dutrun.UUCP (Dik Groot) (11/10/90)
In article <7340024@hpfcso.HP.COM> rrd@hpfcso.HP.COM (Ray Depew) writes: >> Uniterm 2.0e > Can anybody tell me how to send a delete-character (ASCII hex 7F, octal 177) to the serial port from the definition of a function-key ? I am using V2.0e11. I tried using the delete-key, but it deletes the last char from the definition. I tried send('\177') , which gives an error, since the char foillowing the backslash is not zero. I tried send('\0177'), which sends ctrl-N followed by the character 7, since \0 can only be followed by 2 more digits. Thanks ahead for sharing your knowledge. Dik Groot, Delft UofT, computer centre. rcdsdgx@dutrun.tudelft.nl RCDSDGX AT HDETUD1 -- { - - - - - - - - - - - - - - - - - - - disclaimer : I usually lie. } Dik Groot, Delft University of Technology, Rekencentrum, DUneT. Postbox 354, 2600 AJ Delft. ptt: (31)-15-781938 fax: (31)-15-786522 RCDSDGX@HDETUD1.BITNET rcdsdgx@dutrun.tudelft.nl