daveb@cbmvax.cbm.UUCP (Dave Berezowski GUEST) (12/29/86)
Well......I finally got the HAM Juggler to work! There were two problems with it. First I didn't know that when one Kermit's a binary file that one must use the '-i' option. Thus to Kermit the files I had to issue a 'kermit -i -s filename' instead of 'kermit -s filename'. Second, the fourth data file DOES have an error in it as has been previously posted. I used the line that Andy Finkel (of CBM fame) posted. For those of you who want to make sure that your files are ok on your UNIX system, here are the checkums provided by Andy Finkel (using the 'sum' cmd). File Andy's Checksum My Checksum ---- --------------- ----------- movie.uue.1 37844 same movie.uue.2 43005 same movie.uue.3 15044 same movie.uue.4 06921 63752 movie.uue.5 07846 same movie.uue.6 35257 same movie.uue.7 45375 same As you can see my movie.uue.4 file appears to be wrong. However, the demo does work! Unfortunately, I get a few stray horizontal lines in some of the animation frames. Since I know that my video chip works ok with HAM screens, I can only assume that my data is still wrong. Oh yes, the final AMIGA file sizes should be.... Juggler.info 562 Juggler 13784 movie.data 295610 Good luck! -- David Berezowski {caip,ihnp4,allegra,seismo}!cbmvax!daveb Disclaimer: I work for myself, so my words must be my own. (You may borrow them if you like)